Handling vehicle requirements of
sawh steel pipe:
1, State regulations spiral steel pipe bulk manner. If the client requests balers can consider, as appropriate, but must 159MM diameter to 500mm between the bale packaging material strip and fastened, each should be twisted into at least two, and in accordance with the outer diameter spiral pipe and moderate weight increase, prevent the occurrence of loose.
2, The length of the spiral steel pipe can not bale.
3, Both ends of the spiral steel pipe such as threaded, thread protectors should have protection. Lubricate the threaded or rust inhibitor. Spiral Pipe break open at both ends, available upon request, ends with a nozzle protector.
4, If the spiral steel pipe into a container, soft bedding moisture means textile fabrics, mats, etc. on the inner container. For textile spiral pipe scattered in the container can be an external strapping or welding protection, such as stents. Spiral steel packaging should be able to avoid loose and damaged during normal handling, transport and storage.
5, If the demand side of the spiral steel packaging materials and packaging have special requirements should be specified in the contract; if not specified, packaging materials and packaging methods are available for parties to choose from.
6, Packaging materials shall comply with the relevant requirements. If there is no requirement of packaging material, it should be up to comply with the intended use, avoiding waste and environmental pollution.
