Threeway Steel Co., Ltd
E-mail: sales@srtsteelpipe.com
Address: 22nd Floor, Royal Wing Tower, Long Champ International Building, No.9 Xiangfu Road, Changsha, Hunan, China, PC: 410116Phone:0086-731-8873-9521
Keywords :Analysis of Corrosion Causes of Steel Pipes Update : 2022-03-28 View(s) : 829
Corrosion of steel pipes is mainly divided into two categories: internal corrosion and external corrosion. External corrosion is mainly due to the corrosion caused by the connection between the pipeline material and the external environment such as soil, seawater, atmosphere, and other corr...
Keywords :Comparison of advantages and disadvantages of spiral steel pipe and straight seam steel pipe welding Update : 2022-03-25 View(s) : 1130
The welding seam of the spiral steel pipe is longer than that of the straight seam steel pipe . If the pipe length is L, the welding seam length is L/cos(θ). The vast majority of steel pipe defects are concentrated in the weld and heat-affected zone. The long weld means that the probability of ...
Keywords :The welding process of thick-walled steel pipe Update : 2022-03-24 View(s) : 736
Welding method: When welding thick-walled steel pipes , first clean the oil, paint, water, rust, etc. of the welding joints, and then open the grooves according to the wall thickness. It is the gap of the product, which is generally 1-1.5 times the diameter of the electrode or wire. If the groove...
Keywords :The phenomenon of fake and inferior thick-walled steel pipes Update : 2022-03-23 View(s) : 734
1. Fake and inferior thick-walled steel pipes are prone to folding. 2. Fake and inferior thick-walled steel pipes often have pockmarked surfaces. 3. Fake and inferior thick-walled steel pipes are prone to scarring on the surface. 4. Fake and inferior materials are prone to cra...
Keywords :What is the difference between the surface processing of spiral steel pipe and stainless steel pipe Update : 2022-03-22 View(s) : 967
Let's first talk about the original surface of the stainless steel tube: NO.1 The surface that is subjected to heat treatment and pickling after hot rolling. Generally used for cold-rolled materials, industrial tanks, chemical industry equipment, etc., the thickness is thicker from 2.0MM-8.0MM. Dull...