Threeway Steel Co., Ltd
E-mail: sales@srtsteelpipe.com
Address: 22nd Floor, Royal Wing Tower, Long Champ International Building, No.9 Xiangfu Road, Changsha, Hunan, China, PC: 410116Phone:0086-731-8873-9521
Keywords :Different welding methods for welded steel pipes Update : 2020-11-12 View(s) : 1063
Welded steel pipes refer to steel pipes with seams on the surface that are welded after bending and deforming steel strips or steel plates into round or square shapes. The billet used for welded steel pipe is steel plate or strip steel. According to different welding metho...
Keywords :Why can't stainless steel pipe and carbon steel pipe be mixed Update : 2020-11-11 View(s) : 1101
The materials of carbon steel pipe and stainless steel pipe are different, and the two cannot be stacked together. At room temperature, when the carbon steel pipe is in contact with the stainless steel pipe, carburization will not occur immediately. The spotted rust on the stainless steel pipe w...
Keywords :high frequency welded pipe Update : 2020-11-05 View(s) : 915
The nominal diameter of the welded pipe is 6~150mm, the nominal wall thickness is 2.0~6.0mm, and the length of the welded pipe is generally 4~10 meters, according to the rules of the GB3092 Welded Steel Pipe for Low-Pressure Fluid Conveyance. It can be delivered according to fixed-length or mult...
Keywords :straight seam steel pipe Update : 2020-11-04 View(s) : 1028
1. Control of the weld gap The strip steel is sent to the welded steel pipe unit, after rolling by multiple rollers, the strip steel is gradually rolled up to form a round tube blank with an open gap, and the reduction of the squeeze roller is adjusted to control the weld gap to 1~3mm, A...
Keywords :Measuring method of end cut of steel pipe Update : 2020-10-29 View(s) : 1002
Long-distance oil and gas pipelines are connected by a large number of single steel pipes. To facilitate the on-site butt joint construction, the steel pipe manufacturer needs to machine the designed welding groove and blunt edge on the pipe end of each steel pipe and ensure the cutting accuracy...