Threeway Steel Co., Ltd
E-mail: sales@srtsteelpipe.com
Address: 22nd Floor, Royal Wing Tower, Long Champ International Building, No.9 Xiangfu Road, Changsha, Hunan, China, PC: 410116Phone:0086-731-8873-9521
Keywords :Precautions for handling and storing stainless steel pipes at the construction site Update : 2023-06-05 View(s) : 836
After the thin-walled stainless steel pipes are packed and bundled, they should be stored in a dry and clean environment without corrosive gas, and should not be piled up with other items. Because the surface of stainless steel is relatively smooth and bright, and it is also a metal product...
Keywords :Factors Affecting the Accuracy and Resolution of Oil Casing Wall Thickness Detection Update : 2023-06-02 View(s) : 663
The API standard stipulates that the inner and outer surfaces of the import and export oil casing shall not have folds, separations, cracks, and scars. These defects should be completely removed, and the removal depth should not be less than 12.5% of the nominal wall thickness. Oil casing must b...
Keywords :How to solve the phenomenon of "goose head bend" of spiral steel pipe Update : 2023-06-01 View(s) : 1
If the large-diameter spiral steel pipe is processed to a certain length, there must be bending, which is a phenomenon and situation that is often encountered in steel pipes. The large-diameter spiral steel pipe is commonly called "goose head bend" due to the unevenness along the length of the b...
Keywords :Some installation points about stainless steel pipe fittings Update : 2023-05-31 View(s) : 1
The installation method of stainless steel pipe fittings is the same as that of ordinary carbon steel pipe fittings, but there are some special requirements in some processes. as follows: 1. The material of stainless steel pipe fittings should not be in direct contact with other metals and ...
Keywords :Pre-welding and welding essentials of straight seam steel pipe Update : 2023-05-30 View(s) : 669
Pre-welding of straight seam steel pipes : pre-welding includes seams and welds. 1. The joint (that is, the forming seam) has no misalignment or the misalignment is less than the specified value. Generally, the amount of misalignment is ≤ 8% of the plate thickness, and the maximum is not more t...