Threeway Steel Co., Ltd
E-mail: sales@srtsteelpipe.com
Address: 22nd Floor, Royal Wing Tower, Long Champ International Building, No.9 Xiangfu Road, Changsha, Hunan, China, PC: 410116Phone:0086-731-8873-9521
Keywords :Introduction to the use and maintenance of 304 stainless steel pipes Update : 2023-02-10 View(s) : 603
After installing the 304 stainless steel pipe , tear off the packaging film on the surface of the 304 stainless steel pipe, and wipe it clean with a special stainless steel cleaner to avoid the phenomenon of film aging or film retention, and to find out the condition of the stainless steel pipe p...
Keywords :Two points are distinguished for straight seam steel pipes Update : 2023-02-09 View(s) : 570
1. Distinguish straight seam steel pipes according to the outer diameter The outer diameter between φ4.76-φ12.70 mm is fine-diameter straight seam steel pipe; the outer diameter between φ13-φl14 mm is small-diameter straight-seam steel pipe; the outer diameter is between φ114-φ406 mm is medium...
Keywords :Classification and application fields of steel pipe fittings tees Update : 2023-02-08 View(s) : 546
Steel pipe fittings tees are also called steel tee joints or tee joints. The main pipe adopts a three-way joint. It has three vacancies, namely one entrance and two exits; or two entrances and one exit. It is a chemical pipe fitting. It has T-shaped, Y-shaped, equal-diameter tube holes, and diff...
Keywords :Construction characteristics and scope of application of socket argon arc welding of thin-walled sta Update : 2023-02-07 View(s) : 542
Construction characteristics of socket argon arc welding of thin-walled stainless steel pipe 1. The welding process does not require welding consumables (replaced by the expanded pipe edge). The steel pipe is inserted into the pipe fitting socket, and the socket end is welded in a circle by GT...
Keywords :Two Possibilities of Surface Defect Formation of Spiral Steel Pipe Update : 2023-02-06 View(s) : 603
There are two possibilities for the formation of surface defects in spiral steel pipes : one is that the plasticity of the material itself is not good during the deformation process, resulting in cracks and outward folding; Cracks and folds. 1. Thermal simulated tensile test results and anal...